FixMyFryer

Your pilot light is lit and the gas valve turned to on and units main burner is not firing.(Or your auto pilot has lit and main burner not igniting)
Make sure mainswitch in correct position.
Drainvalve handle needs to be closed.(microswitch)
Reset High Limit Thermostat(see top tips)
If you depress high limit several times and it keeps clicking then High Limit needs replacement.
If you felt one click and the high limit reset.
You can now test your machine to Drop/Ready temperature.
If high limit trips again before setpoint.
Check oil calibration. If calibration good then replace high limit.
If calibration bad replace relevant probe for fastron/c8000.